KNIPEX 16 30 135 SB Stripping Tool for Spiral Cutting 6 to 29mm Cable Sheaths

Some cable preparation tools are designed for one basic motion. Others are built for the kind of flexibility real installation work demands. The KNIPEX 16 30 135 SB Stripping Tool for Spiral Cutting 6 to 29mm Cable Sheaths belongs firmly in the second category. Made for stripping round cable sheaths in a wide diameter range from Ø 6.0 to 29.0 mm, it is designed to handle sheath materials such as PVC, rubber, silicone, and PTFE with the kind of control professionals need when accuracy matters.

What makes this tool especially practical is the variety of cutting modes built into one compact design. KNIPEX specifies that you can switch from circular cutting to longitudinal cutting simply by turning the tool body, while spiral cutting allows the removal of intermediate sheath sections. On site, that versatility matters. Whether you need to open a cable cleanly at the end, run a controlled lengthwise cut, or remove a section from the middle without disturbing the rest of the cable, this tool is designed to adapt to the job rather than force the job to adapt to the tool.

Control is a key part of the design. The self-tightening holding lever helps keep the tool secure during use, while the knurled nut for cutting depth adjustment allows the blade depth to be tuned for different sheath thicknesses and materials. That gives the user more confidence when working with sensitive internal conductors, where too little control can quickly lead to damage. Instead of relying on feel alone, the tool gives a more measured and repeatable approach to sheath stripping.

KNIPEX also builds this model with everyday durability in mind. The body is made from shock-resistant plastic, keeping it lightweight yet practical for trade use, and the blade is replaceable when worn. KNIPEX lists the dedicated spare blade as 16 39 135, which helps make the tool a sensible long-term addition to an electrician’s or installer’s kit rather than a disposable item. At 135 x 85 x 36 mm and 120 g, it stays compact enough for routine carry while still offering the stability needed for controlled cable work.

Key Features

• For stripping round cable sheaths made of PVC, rubber, silicone, or PTFE.
• Stripping capacity: Ø 6.0 to 29.0 mm.
• Self-tightening holding lever for secure handling.
• Knurled nut for cutting depth adjustment.
• Change from circular to longitudinal cutting by turning the tool body.
• Spiral cutting for removing intermediate pieces.
• Replaceable blade for longer service life.
• Shock-resistant plastic body.
• Length: 135 mm.
• Dimensions: 135 x 85 x 36 mm.
• Spare blade: 16 39 135.
• Spare blade EAN: 4003773027317.