When you’re soldering pipework or brazing fittings, the difference between a smooth job and a frustrating one often comes down to control—steady ignition, consistent heat, and the ability to work comfortably around obstacles. The Jefferson Tools JEFGASTORCH Soldering & Brazing Gas Torch is built for exactly that kind of hands-on work, delivering a practical torch setup suited to professional plumbing, maintenance, workshop repair, and light fabrication.
At the heart of the design is a push-button, piezo self-igniting system, so you can light up quickly without reaching for separate ignition tools. The 360° swivel flame tube adds real-world flexibility when access is tight—helping you aim the flame where it’s needed without forcing awkward wrist angles or constantly repositioning the cylinder.
The torch is engineered with user safety and repeat use in mind, featuring a brass tip, built-in gas regulator, and a safety trigger lock for more confident handling on busy jobs. It’s designed to run on commonly used fuels, with compatibility listed for Propane and MAPP® / MAPP-Pro™ gases using MT-1 and PT-1 fuel containers, making it a versatile choice for tradespeople who may switch fuels depending on the application and required heat output.
Capacity guidance is clearly outlined on the manufacturer’s specification sheet. Overall, the torch lists a soldering capacity of 19–102mm and a brazing capacity of 6–32mm (typically referencing pipe diameter/application range). When used with Propane, the stated ranges are soft solder 19–76mm and brazing 6–19mm. With MAPP, the stated ranges increase to soft solder 19–102mm and brazing 6–32mm, giving you a wider working range for higher-heat tasks.
A clear safety note is also provided: this torch is not suitable for acetylene, helping ensure correct fuel selection from the outset. With a listed gross weight of 0.65kg, it remains practical to carry and store as part of a professional kit.
Key Features
-
Push-button piezo self-igniting system
-
360° swivel flame tube design
-
Compatible with Propane and MAPP® / MAPP-Pro™ (MT-1 & PT-1 containers)
-
Brass tip, built-in gas regulator & safety trigger lock
-
Soldering capacity: 19–102mm
-
Brazing capacity: 6–32mm
-
Warning: Not suitable for acetylene
Specifications
-
Brand: Jefferson Tools
-
Product Type: Soldering & Brazing Gas Torch
-
SKU: JEFGASTORCH
-
EAN (GTIN-13): 5060448633913
-
Ignition: Push-button piezo self-igniting
-
Flame tube: 360° swivel
-
Fuel compatibility: Propane; MAPP® / MAPP-Pro™ (MT-1 & PT-1 containers)
-
Soldering capacity: 19–102mm
-
Brazing capacity: 6–32mm
-
Propane guidance: Soft solder 19–76mm; Brazing 6–19mm
-
MAPP guidance: Soft solder 19–102mm; Brazing 6–32mm
-
Not suitable for: Acetylene
-
Gross Weight: 0.65 kg
