Draper Expert Axle Stands 6 Tonne Pair 54722

A jack is for lifting. Axle stands are for supporting. That distinction matters in every garage or workshop. The Draper Expert 54722 Axle Stands are heavy-duty support stands designed to hold a suitably rated vehicle after it has been lifted, giving a more stable working position for inspection, servicing and repair tasks.

Each stand is rated at 6 tonnes, with a stated 12 tonne capacity per pair. The stands use high-quality carbon steel construction, with hardened and tempered components and hardened steel pins. The wide tripod base is designed to spread the load and improve stability when the stands are positioned correctly on firm, level ground.

The height range runs from 535mm to 870mm across six settings, giving useful adjustment for taller vehicles and higher support points. This makes the pair suitable for serious workshop use where a lighter duty stand would not offer the same capacity or height range. The pin style adjustment is straightforward, but the pin must always be fully engaged before any load is applied.

Correct use is essential. Never work under a vehicle supported only by a jack. Always follow the vehicle manufacturer's lifting and support point guidance, use stands in pairs where appropriate, work on a solid level surface and stay within the rated capacity. Inspect the stands before use and do not use damaged support equipment. These stands are a sensible choice where capacity, height range and stable support are more important than compact storage.

Key features and specification highlights

• Pair of Draper Expert heavy-duty axle stands
• 6 tonne capacity per stand
• 12 tonne stated capacity per pair
• Minimum height: 535mm
• Maximum height: 870mm
• Six height settings
• High-quality carbon steel construction
• Hardened and tempered with hardened steel pins
• Wide tripod base for stability
• For vehicle support after lifting with a suitable jack